Zennio IDAC, User Manual

Page: 23 / 29

IDAC
https://www.zennio.com/ Technical Support: https://support.zennio.com/
23
Enabling and disabling the button sounds can be done in parameters or through an
object, being also possible to define in parameters whether the buttons sounds should
be initially enabled or not.
ETS PARAMETERIZATION
After enabling the Customize Sounds
in “Configuration” screen, in Outdoor Module,
(see section 2.3.1), a new tab will be incorporated into the tree on the left.
Figure 11. External Module Sounds
Disable Button Sounds [ disabled /enabled ]: enables or disables acoustic
signals of actions derived from button presses and access attempts.
➢
Enable/Disable Button Sound Through a 1-bit Object
[ disabled/ enabled ]: makes it possible to disable / resume the button
beeping function in runtime by w
riting to a specific object (“
[Out] Sounds
–
Disabling Button Sound
”).
•
Button Sound (After Download) [ enabled /disabled ]: sets whether
the button beeping function should start up enabled or disabled after
an ETS download.
•
Value [ 0 = Disabled; 1 = Enabled / 0 = Enabled; 1 = Disabled ]:
parameter to select which value should trigger which action when
received through the indicated object.