IDAC
Technical Support:
16
2.3
OUTDOOR MODULE
This module will be installed outside the room, embedded in the door, to allow access
to authorized persons. For this purpose, it has an NFC reader and an BLE module for
reading the access cards and keys of the users.
It also has
a button
for doorbell functionality and, as in the case of the indoor module,
it is equipped with a
proximity sensor
and an
ambient luminosity sensor
that will
allow to adjust the backlight according to to different situations of presence or
illumination.
This module does not have the activity functionality; its LEDs will be always on
(provided that there is KNX bus connection).
2.3.1
CONFIGURATION
In the "Configuration" tab of the Outdoor Module, the general configurable parameters
of the module are displayed. Most of them are checkboxes to activate other
functionalities.
ETS PARAMETERIZATION
Figure 7.
External Module Configuration
