IDAC
Technical Support:
8
➢
[
After Programming/Reset
]: read requests are sent after the parameterised
delay
[
1…
10
…65535
] [
s
/min/h
] when a restart (after battery depletion or
change), a download or a reset device from ETS occurs.
➢
[
After Reconnect
]: read request are sent when the connection to the bus is
recovered, after the parameterised
delay
[
1…
10
…65535
] [
s
/min/h
].
➢
[
After Programming/Reset and Reconnect
]: combination of the two above
options.
Sound Type
[
Sound 1
/ Sound 2
]: determines the range of sounds the device
will incorporate for button, doorbell, and alarm acoustic signals.
The project topology shows by default, in addition to the objects of the
access control
module, the following:
“[General] Scene: Receive”
and
“
[General] Scene: Send
”
: objects for
respectively receiving and sending scene values from/to the KNX bus
whenever it is necessary.
“[General] Bolt – Alarm”:
object which will report a mechanical trouble in
the bolt for revision.
“[General] Servomotor – Alarm”:
object which will report a problem in the
servomotor that makes it possible to open the door. When this happens, it
must be checked.
“[General] Tampering – Alarm”:
object which will notify that the enveloping
has been removed.
“[General] Tampering – Date and Time”:
8-byte object that is sent when
the enveloping is removed, informing the date and time of the action.
Please refer to the
“Access Control”
user manual, available under the IDAC
, for detailed information about the rest of the
available objects.
