IDAC
Technical Support:
13
Figure 5.
Touch Locking
1-Bit Object
[
disabled/
enabled
]: enables the 1-
bit object “
[In] Touch
Locking
” to trigger the touch lock.
➢
Value
[
0 = Unlock, 1 = Lock
/ 0 = Lock, 1 = Unlock
]: parameter to select
which value should trigger which action when received through the
indicated object.
Scene Object
[
disabled
/enabled
]: enables the touch locking and unlocking
when receiving the configured scene value through the object (“
[General]
Scene: receive
”).
➢
Lock: Scene Number (0 = Disabled)
[
0/
1
…64
]: scene number that locks
the buttons.
➢
Unlock: Scene Number (0 = Disabled)
[
0/
1
…64
]: scene number that
unlocks the buttons.
2.2.5
SOUNDS
The Indoor Module of IDAC emits
two types of sounds
, depending on the action
performed:
Sending Confirmation
: a short and sharper beep that indicates the sending of
an object to the bus as a result of a press.
Alarm:
sharp and longer beep than the previous one, high intensity, which is
typically used as alarm or doorbell.
