ICX 500 Gateway
Doc.no.A100K12202
Page 59
The server will be out of service for approx. 30 seconds, and any
active calls will be cancelled and not restored.
•
SetNode
: Modify the node number of the server.
o
By default the ICX-500 server has node number 1. When multiple servers are
connected in AlphaNet, each server must have a unique node number. One can use
the SetNode button to change the node number. If the node number in the AlphaPro
database doesn't match the node number of the ICX-500 server, you will automatically
be prompted to change the node number when you try to establish communication with
the ICX-500 server.
4.6.4. Communication Status window
The progress of the data transfer is shown in a separate "Communication Status" window. If the
flag Close when finished is enabled, the status window will automatically close when the transfer
is finished.
Starting a “Send All” operation
