ICX 500 Gateway
Doc.no.A100K12202
Page 31
•
- If the ICX-500 has access to an e-mail server, log events can be forwarded to a
predefined e-mail address
•
SNMP Trap
- Enter the IP Address of the remote computer running the SNMP service. Select
SNMP System Information to configure additional SNMP parameters (Name, Location,
Contact, Community String and SNMP Port).
Log configuration
To configure logging press
Edit
next to the Destination, and enter relevant parameters. The
different logs are enabled by setting "Pri Level" =
Info.
Enable
logs by setting Pri Level = "Info"
After changed are Saved and Applied, the logging can be tested by clicking on "Generate test log
messages".
To filter on a specific text in the log strings, add the required text in the Contains field. Only log
events that contain this text will be sent to the log.
Logging to Local Filesystem
The log system is creating a new file every day for each of the log types (Debug, System and
Statistics).
Log rotation is used to prevent the logs from growing out of control. Every 10 minutes there is a
check if the log files are consuming more than 20MB of memory space. If more than 20MB, the
