ICX 500 Gateway
Doc.no.A100K12202
Page 37
•
Enter the
Host Name
and
IP address.
Defining a host name
When interfacing the ICX system to an external SIP PBX, it might be that the SIP PBX require
"Host name" instead of IP address. Then this Host name table can be used, see SIP Trunk -
Host name
3.3.11. DHCP Server
The ICX500 Gateway can be configured to act as a DHCP Server, and automatically provide
and assign IP addresses to client devices (e.g. intercom stations).
•
Make sure that the DHCP server does not conflict with other
DHCP servers on the local network!
To configure the DHCP Server:
•
In System Configuration > DHCP server, press Add new, and select which Ethernet
Interface to use for the DHCP server
•
Select IP address range start and end.
•
Select the Lease time. The lease time is the period of time that the IP address is
allocated to the device. At the end of the lease, if the device has not yet renewed it,
the IP address is free to be handed out to other devices. Default lease time is 1 hour.
