ICX 500 Gateway
Doc.no.A100K12202
Page 120
7.5.2. Change UDP port number from 5060
The default UDP port number 5060 used for SIP communication can be changed in the AMC-IP
memory, either by using the NVRAM editor from the TST console or by using the $SNV command
in Event Handler.
A small reset of the ICX-500 is required for the change to take effect.
Remember to define and open the new port in the Filters settings in AlphaWeb.
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or
for damages arising from the information therein. Zenitel products are developed and marketed by Zenitel.
The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel
reserves the right to modify designs and alter specifications without notice.
ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third-party
information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if
not otherwise explicitly agreed in writing with Zenitel. Any authorized reproduction, in part or in whole, must
include this legend; Zenitel – All rights reserved
ex_profile.ip_config.sip_data = 5060
