ICX 500 Gateway
Doc.no.A100K12202
Page 25
•
192.168.1.40/26 is equivalent to IP address 192.168.1.40 and net mask 255.255.255.192.
3.3.2. Routes
The Routing table must be configured if there is a need to communicate with devices outside own
subnet. Three different route types can be defined:
•
Default route (= Default gateway)
•
Net route - A route to one particular IP network
•
Host route - A route to one particular host
Defining a Default Gateway
To define a Default Gateway, select
Add New
, and enter:
•
Destination net
= 0.0.0.0/0
•
Gateway on local subnet
= IP Address of the default gateway
•
Interface
= On which Ethernet interface the default gateway is located
•
Press
Validate
•
Press
Save & Apply
Defining 10.9.8.1 as the Default Gateway on Eth1
Only one Default Gateway must be defined.
Defining a Net Route
To define a route to one particular network, select
Add New
, and enter:
