Zeiss S88, Instructions For Use Manual

Page: 52 / 182

52
Description
G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009
8 Brightness control
You can adjust the brightness using the two control keys on the control
panel.
Note:
The brightness of the xenon lamp can also be adjusted by pressing
the appropriate keys on the foot control panel.
9 Yellow indicator lamp
Lights when the lamp has failed. After activation and ignition of the
backup lamp, the yellow indicator lamp goes out again.
Note:
If the first lamp has failed and the backup lamp is in use, make sure to
have a backup lamp module ready at hand as a precaution.
10 Green indicator lamp
Lights when the illumination has been switched on.
11 Selector:
Note:
You can adjust the selector in such a way that you can switch the illu-
mination on/off on the right-hand and left-hand sides of the foot control
panel.
Illumination is off.
Illumination is on.
Illumination can be switched on/off on the left-hand side of
the foot control panel.
Illumination can be switched on/off on the right-hand side of
the foot control panel.