Zeiss S88, Instructions For Use Manual

Page: 100 / 182

100
Operation
G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009
– Configuration menus 4 and 5 (SETTINGS 4 and 5), complete
"STORE" key
The focusing and zoom values currently set on the surgical microscope
are saved for the user currently selected. The function of the "STORE"
key is the same in all modes.
The current focusing and zoom values are stored as focus memory (FOC-
MEM) and zoom memory (ZOOM-MEM).
To set the instrument to these stored focusing and zoom values, press
keys C and D on the foot control panel or the freely configurable keys on
the handgrips, see configuration mode 1.
Caution:
Be extremely careful when changing these settings. You should change
settings only under your own user ID. Notify all users of any changes, or
make sure that each user only works under his own user ID.
Adjusting the settings
The associated buttons "
∇
" and "
Δ
" allow you to change the settings in de-
fined steps.
Saving parameter settings
As soon as you have entered a parameter setting, it is saved under the
current user ID.