Zeiss S88, Instructions For Use Manual

Page: 134 / 182

134
Operation
G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009
OPMI
®
PRO magis: assigning a function to keys C and D of the foot
control panel
Keys C and D of the foot control panel can be configured as required.
In configuration mode 1, the upper and center display boxes enable you
to allocate one of the following functions to keys C and D:
FOOT LEFT C:
Use the upper section of the display and key field (FOOT LEFT C:) to as-
sign one of the possible functions to key C of the foot control panel.
FOOT RIGHT D:
Use the middle section of the display and key field (FOOT RIGHT D:) to
assign one of the possible functions to key D of the foot control panel.
Selection
At each press of the "
∇
" or "
Δ
" key, the program jumps from one possible
configuration to another.
Caution:
Be extremely careful when changing these settings. You should change
settings only under your own user ID. Notify all users of any changes, or
make sure that each user only works under his own user ID.
Saving parameter settings
As soon as you have entered a parameter setting, it is saved under the
current user ID.
Display Function of key C or D of the foot control panel
PHOTO Triggering an exposure via the camera interface, i.e. trig-
gering the shutter of a connected 35 mm camera.
AUX Triggering an AUX signal via the AUX interface, e.g. to
switch an external instrument on or off (see remote control
socket on the connector panel of the suspension system).
Path: After you have switched on the instrument, the basic mode is auto-
matically displayed.
To access configuration mode 1 from the basic mode, simultane-
ously press the "MODE" and "STORE" keys.
Path: To return to the basic mode, press the "MODE" key in configuration
mode 1 or do not press any key for 20 seconds.
C D
Configuration
mode 1
MODE
STORE MANUAL
FOOT
LEFT C:
PHOTO
FOOT
RIGHT D:
PHOTO