Zeiss S100, Instructions For Use Manual

Page: 198 / 278

Operation S100 / OPMI pico
Version 9.0
Page 198 G-30-1781-en
Sidecut
The image is cut off on the sides and only the middle of the image is
displayed in an aspect ratio of 4:3.
3 Display the ZEISS logo
Here you can choose whether the ZEISS logo is to be displayed in the live
image and in the recording.
4 Video standard
You can switch from 50 Hz (PAL) and 60 Hz (NTSC) here.
After you have started the switchover, the settings will be applied and
the camera will restart. This process can take up to 30 seconds. In the
meantime the ZEISS logo will be displayed filling the entire screen.
5 DVI / HDMI output
Here you can toggle between the video formats "PC mode" and "Video
mode" when a high-resolution display unit (monitor, projector, etc.) is
connected.
You can find the correct setting for your connected monitor or TV in
the Instructions for Use belonging to your output device.
If you do not find any information for this setting, we recommend PC
mode (default) setting for display units with a DVI connection. For display
units with an HDMI connection we recommend the video mode setting.
PC mode offers greater image quality than video mode.