Zeiss S100, Instructions For Use Manual

Page: 147 / 278

Version 9.0
G-30-1781-en
Page 147
S100 / OPMI pico Operation
PEAK / AVERAGE The setting "Peak / Average" is used to modify the lighting control
characteristics. A lower value results in peak value-based lighting control,
which responds precisely to changes in the project brightness. A higher value
sets mean value-based lighting control, which responds less sensitively to
changes in brightness.
Manual setting possibilities
RED submenu In this submenu, you can set the camera's red value between -20 and +20.
To do this, proceed as follows:
• Select the menu item "RED" in the "ADVANCED" menu using the
control keys and press the <Enter> key.
• Select the "SETTINGS" menu item with the control keys.

The selected choice is displayed with an arrow.
• Change the red value using the control keys.
• Press the <Enter> key to save the changes.

The selection is saved and you return to the "ADVANCED USER
SETTINGS" menu.
• If you do not want to save your changes, return to the "ADVANCED USER
SETTINGS" menu via "CANCEL". The red value is set as it was when the
submenu was accessed.
The red value setting also influences the camera's white balance. See
“Carrying out the white balancing procedure (white bal)” on page 164.
BLUE submenu In this submenu, you can set the camera's blue value between -20 and +20.
To do this, proceed as follows:
• Select the menu item "BLUE" in the "ADVANCED" menu using the
control keys and press the <enter> key.
• Select the "SETTINGS" menu item with the control keys.

The selected choice is displayed with an arrow.
• Change the blue value using the control keys.
• Press the <Enter> key to save the changes.

The selection is saved and you return to the "ADVANCED USER
SETTINGS" menu.