background image

Safety measures

S100 / OPMI pico

Version 9.0

Page 10

G-30-1781-en

magnification and light intensity are manually controlled by the physician or 
the surgeon during treatment or surgery.

A video player is connected to the system for educational purposes or to 
visualize the progress of the treatment / surgery.

After the procedure / 

 operation

The physician or the surgeon swings the surgical microscope from the 
treatment or surgical area into its standby position. 

 

The S100 / OPMI pico can be cleaned and disinfected.

Disposal:

For the disposal of electrical and electronic devices, please observe the 
relevant national legislation and other regulations applicable in your country.

Notes for the operator

Correct operation of the device is required to ensure safe use,

so please familiarize yourself thoroughly with these Instructions for 

 

Use before starting up the instrument. 

Please comply with the Instructions for Use of the other system 
components as well. You can obtain additional information from 

 

ZEISS Service.

CAUTION

Injury to the patient's eye!

The S100 / OPMI pico must not be used for ophthalmological procedures!

Make sure that no light enters the patient's eyes.

CAUTION

Live video images and recorded video sequences, video clips (cut sequences) 
and single images must not be used for diagnosis purposes. Visualized 
images may contain variations in shape, contrast and color.

Summary of Contents for S100























































































































































































































































































Reviews: