Zeiss S100, Instructions For Use Manual

Page: 180 / 278

Operation S100 / OPMI pico
Version 9.0
Page 180 G-30-1781-en
Camera
In the "Camera" submenu you can adjust the brightness, image, color and
profiles.
The settings in the "Brightness", "Image" and "Color" tabs directly affect the
profile set in "Profiles". Different values can be saved in the respective tabs for
each profile. The settings that are configured are saved automatically. When
the profile is changed (see "Active Profile" Page 185) the settings saved for
this profile are loaded.
Brightness
In the "Brightness" tab you can configure different exposure and brightness
settings.
Use the <Brightness> key to go directly to the "Brightness" tab.
Fig. 80: Brightness
1 mode
In "Mode" you can choose between three different exposure controls:
automatic, low light, manual
Automatic In this mode the camera adjusts the brightness of the video image
automatically to the value specified in the "Auto level". Exposure control
affects the exposure time of the camera.
In "Automatic" mode the target brightness is specified and the camera
adjusts the shutter speed in a range between 1/50 (60) s and 1/10000 s.
There is no screen output regarding the shutter speed actually set. The
nominal brightness can be adjusted between 0 and 100%. Changes are
made in 5% increments.
1
2
3
4
5
6