Zeiss S100, Instructions For Use Manual

Page: 139 / 278

Version 9.0
G-30-1781-en
Page 139
S100 / OPMI pico Operation
Proceed as follows to select a user and to load and activate the corresponding
configuration:
• Press the <Config> key to go to the configuration menu.
• In the Configuration menu, select the menu item "User" with the control
keys
and press the <Enter> key.

The following menu appears:
• Select the required user with the control keys.

The selected user is displayed with an arrow.
• Press the <Enter> key to temporarily save the user settings.

The device switches back to the configuration menu. The user settings
are finally saved after you exit the configuration menu. If changes have
been made, a prompt is displayed for each user as to whether the
settings should be saved. Answer this prompt with "YES" or "NO".
• If you do not want to save any changes to the user, press:
– the <Cancel> key to return to the configuration menu,
– the <Config> or <Live> key to return to live image mode.
USER SELECTION

USER 1
USER 2
USER 3
USER 4
CANCEL
LOAD USER 1 SETTINGS