Zeiss S100, Instructions For Use Manual

Page: 228 / 278

Care and Maintenance S100 / OPMI pico
Version 9.0
Page 228 G-30-1781-en
Changing the fuse - halogen illumination system
The fuses are integrated in the power inlet socket for the power cable.
To change the line fuse, proceed as follows:
• Turn off the device at the power switch.
• Remove the power plug from the power outlet.
• Unplug the power cable from the power inlet socket.
• Insert a suitable object under the two flaps (1) and pull out the fuse
holder (2).
• Remove the defective fuse.
• Insert the new fuse and push the fuse holder back into its compartment.
Observe the correct fuse rating of the line fuse. This rating can be also found
on the type label.
• Connect the device to the power supply.
• Turn on the device at the power switch.
Fig. 104: Changing the fuses
CAUTION Use suitable device fuse
• Only use the fuse indicated for the device (see order data).
Fuse rating
For 100 V...125 V ~ T 6.3 A/H 250 V
For 220 V...240 V ~ T 3.15 A/H 250 V
1
2
1