START-UP
Axioscope 5/7/Vario
Mounting standard components
ZEISS
03/2018
430035-7344-001
61
3.1.17
Mounting the illuminator TL LED10 CRI90/RL LED10 CRI90
•
Using the Allen wrench (AF 3) (Fig. 3-27/
7
), loosen the clamping screw (Fig. 3-27/
6
) of the TL
illumination connector (Fig. 3-27/
1
) or the RL illumination connector (Fig. 3-27/
2
) at the lower back of
the stand.
•
Connect the illuminator’s power plug (Fig. 3-27/
4
) to the socket (Fig. 3-27/
3
) on the lower part of the
stand (or the upper part of the stand).
•
Match the illuminator’s (
5
) dovetail ring to the connection piece on the stand. Ensure that
the illumination cable is not being pinched or clamped.
•
Tighten the clamping screw (
6
or
2
) with the Allen wrench (AF 3).
Fig. 3-27
Mounting the TL LED10 illuminator or RL LED10 illuminator