Zeiss Axioscope 7, Operating Manual

Page: 43 / 140

START-UP
Axioscope 5/7/Vario Mounting standard components ZEISS
03/2018 430035-7344-001 43
3.1.2 Mounting the Axioscope 5 Vario material upper stand part on the stand column
ATTENTION
Equipment or parts having a mass of 18 kg or more shall be provided with a means for careful
lifting and carrying.
If you are going to use the Axioscope 5 Vario material stand consisting of the Vario upper stand part
(
288H
Fig. 3-2/
2
) combined with gear box (
288H
Fig. 3-2/
3
) and the Vario stand column (
288H
Fig. 3-2/
1
), proceed as
follows:
•
Unpack the Vario upper stand part with gear box and the Vario stand column.
•
Position the Vario upper stand part (
287H
Fig. 3-2/ 2 ) on the mounting plate (
288H
Fig. 3-2/ 5 ) of the Vario stand
column and tighten it with the 6 Allen screws (
287H
Fig. 3-2/ 4 ).
•
In order to adjust the microscope vertically, loosen the release lever (
292H
Fig. 3-2/ 6 ) on the stand column
and adjust the height (according to the size of the specimen) with the hand wheel (
292H
Fig. 3-2/ 7 ).
•
Then tighten the release lever again.
Fig. 3-2 Mounting the Vario upper stand part on the stand column