OPERATION
Axio Observer
TFT display touchscreen on the Axio Observer 7, 7 materials
ZEISS
12/2016
431004-7244-001
135
b)
Setting the parfocality/parcentricity
The parfocality function is activated or deactivated
by using the
On
and
Off
buttons.
To configure the parfocality function press the
Adjustment
button. This will activate a wizard
which will guide you through the configuration
procedure.
All the objectives must be focused in sequence.
Start with all dry objectives from the highest to the
lowest magnification. Then, proceed with all
immersion objectives from the highest to the
lowest magnification. Press the
Next Objective
button to rotate the nosepiece to the next
objective. After all objectives have been focused,
press the
End
button.
(4)
Stage
This tab will be displayed if a scanning stage
mot. P; CAN is used.
Here, the user adapts the XY stage movement to
the objective magnification.
This influences the functions provided by the
Load
position
button on the
Microscope -> Control
page.
Fig. 126
Settings -> Components -> Focus ->
Set parfocality / parcentricity page
Fig. 127
Settings -> Components -> Stage
page
Fig. 128
Settings -> Components -> Stage ->
Stage speed objective page
Summary of Contents for Axio Observer Series
Page 1: ...Axio Observer Inverted microscope Operating manual...
Page 192: ......