![background image](http://html2.mh-extra.com/html/zeiss/axio-observer-series/axio-observer-series_operating-manual_3338528012.webp)
SAFETY INSTRUCTIONS
ZEISS
Warranty information
Axio Observer
12
431004-7244-001
12/2016
Dust and dirt may impair the device's performance. The devices must be effectively protected
from such influences and covered with the dust cover when not in use. This should only be put
on once the device has been switched off and has cooled down. Otherwise this could cause a
fire.
Do not operate the supplied equipment in areas in which there is a danger of explosion or in
the presence of volatile anaesthetics or flammable solvents, such as alcohol, benzene, etc.
Only operate the device on a hard, non-flammable surface.
The devices are not equipped with any special equipment to protect them against corrosive,
potentially infectious, toxic, radioactive, or other substances that could be hazardous to health.
All legal regulations must be complied with when handling such substances, particularly the
prevailing national rules for accident prevention.
To prevent the device from damage, ensure that the generation of electrostatic charges is
avoided through suitable design of the workplace environment.
2.2
Warranty information
The manufacturer guarantees that the device is free of material or manufacturing defects when delivered.
Any defects must be reported immediately and steps taken to minimize damage. If such a defect is
reported, the device manufacturer shall be obliged to correct the default, either by repairing the
instrument or replacing it with a new one, at the manufacturer’s discretion. No warranty is given for
defects caused by natural wear (particularly of wearing parts) and improper use of the device.
The instrument manufacturer shall not be liable for damage caused by misuse, negligence or any other
tampering with the instrument, particularly the removal or replacement of instrument components, or
the use of accessories from other manufacturers. Such actions shall invalidate any warranty claims.
With the exception of the work described in these safety instructions, no maintenance or repair work is
to be carried out on these microscopes. Repairs may only be performed by ZEISS Service or individuals
specially authorized by ZEISS Service. In the event of a problem with the instrument, please contact the
ZEISS microscopy service team in Germany or your local ZEISS overseas representative.
Summary of Contents for Axio Observer Series
Page 1: ...Axio Observer Inverted microscope Operating manual...
Page 192: ......