Management Settings
53
Configuring the Wireless Access Point
Configuring Remote Settings
Manage the wireless access point remotely through simple network manage-
ment protocol (SNMP), secure shell (SSH), auto configuration, and system
logs.
Figure 5-19. Remote Settings
Table 5-17. Remote Settings Submenus
Item
Description
SNMP
Enable or disable remote management via Simple
Network Management Protocol (SNMP).
Trap Server IP
Input the IP address of the trap server for receiving
log messages.
Trap Server Port
Input the trap server port number
Read Community
Set a password for read information.
Write Community
Set a password for write information.
Apply
Click Apply to confirm that you want the new set-
tings to take effect.
Cancel
Click Cancel to disregard changes and revert to pre-
vious settings.
SSH
Enable or disable remote management via Secure
Shell (SSH).
Enable Auto Configure
Enable or disable automatic configuration of remote
settings.
Apply
Click Apply to confirm that you want the new set-
tings to take effect.
Cancel
Click Cancel to disregard changes and revert to pre-
vious settings.
