Management Settings
58
Configuring the Wireless Access Point
Caution - Do not interrupt the firmware upgrade process. Do not turn off or
unplug the wireless AP, shut down the computer, or attempt to go online until
the upgrade process is done.
5.
Go to General to verify that the new firmware has been installed successfully.
Figure 5-24. Firmware Upgrade
Configuring Backup/Restore Settings
1.
Go to Management, then click Backup/Restore.
2.
To back up a copy of the current settings to a file, click Backup.
3.
The Web browser will prompt you to either open or save the file.
4.
To retrieve the backed up settings from a file, click Browse and locate the file.
5.
Click Retrieve. A window appears, informing you that the access point has been
restored to previous settings. The access point will then restart.
Caution - Do not go online, turn off the access point, shut down the computer
or do anything else to the access point until it finishes restarting! When the
LED turns off, wait a few more seconds before doing anything with the access
point.
