Management Settings
52
Configuring the Wireless Access Point
2.
Click the checkbox next to Turn Management Control On to enable this fea-
ture.
3.
Select whether to allow or deny the IP addresses you will specify.
4.
Under Add New Address, input the IP address you want to block or allow.
5.
Click Apply. The new IP address appears in the IP Address List.
6.
Repeat steps 4 and 5 to add more IP addresses.
Figure 5-18. Management Control
Table 5-16. Management Control Submenus
Item
Description
Turn Management
Control On
Click the check box to enable management control.
Mode
Choose whether to allow or block the IP address.
IP Address List
Shows the IP addresses you chose to block or allow.
New IP Address
Input the IP address you want to block or allow.
