First-Time Connection and Configuration
13
Installing the Wireless AP
First-Time Connection and Configuration
Connecting to a PC
1.
Connect one end of an RJ-45 cable to an Ethernet port on your computer.
2.
Connect the other end to the LAN/PoE port on the wireless AP.
Note: Make sure all other components and hardware are properly connected
and installed. Refer to “Hardware Installation” on page 10.
3.
Configure the computer with a static address: 192.168.1.x, where x is any
number except 0, 1, or 255.
Note: Default IP address for the LAN/PoE port: 192.168.1.1.
4.
Open the Web browser and type the IP address (default:192.168.1.1) of the
wireless AP into the address field. The login page opens.
Figure 3-5. Wireless AP Login Page
