Basic Setup Menu
33
Configuring the Wireless Access Point
Basic Setup Menu
On the user interface menu, go to Basic Setup and configure these basic
parameters.
Figure 5-7. Basic Setup Menu
Table 5-4. Basic Setup Menu
Item
Description
AP Mode
Select either Fat AP or Thin AP.
User Name
Change the user name. The default is admin.
Access Point Name
Change the access point name. The last six characters of the
default name represent the last six characters of the AP MAC
address.
Ethernet Data Rate
Set the transmission rate of the wireless AP. Lower data rates
deliver stronger abilities to resist environmental interference.
Link Integrity
When enabled, the AP will disconnect the wireless terminal that
has been connected and reject the wireless terminal which
attempts to connect to if no LAN connection is detected.
This function must be enabled simultaneously with the Ping test
functions.
QoS Class Mode
Choose to apply Quality of Service (QoS) policies from available
options: Dest MAC, Source MAC, VLAN ID, VLAN Priority, and
Eth Type.
Configure AP As
The AP is configured as a Bridge. Select DHCP Client to obtain
an IP address from the DHCP server automatically, or select
STATIC to enter the values manually.