manualshive.com logo in svg

Yuchai YC25-8, User Manual

Share
Download
Yuchai YC25-8 User Manual Download Page 93

Hydraulic Digger 

4-15 

Turning The machine

 

Caution: Before operate the joy stick, it need to check the 

station of the bulldozer. If the bulldozer in back, the 

operation reverse 

Use the left& right driving joy stick to replace the direction of the 

driving. 

Avoid to replace the direction sudden as far as possible. 

1.  Turn the direction when the machine stops 

Turn left: 

Driving forward, pull the right driving joy stick, the machine will 

turn left. Driving backward, push the right driving joy stick, the 

machine will turn left. 

Turn right: the mode same as turn left. 

 

2.  Turn the direction at the same place. 

When the machine is turn left at the same place, push the left 

driving joy stick and pull the right driving joy stick. 

When the machine is turn right at the same place, push the 

right driving joy stick and pull the left driving joy stick 

Summary of Contents for YC25-8














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands