Yuchai YC25-8, User Manual

Page: 75 / 205

Hydraulic Digger
3-19
Press 1.PWR key, the electrical source open, the radio starts.
Press it again, the electrical source close, the radio stops.(If the
radio is the automatic electrical source, press any key to start the
radio, press 1.PWR key stop it.)
2. Switch the wave band
Press 8.BAND key to switch the wave band, the order of the wave
band:FM1-FM2-FM3-AM1-AM2
3. Channel selection by automatic
Press 7.SEEK key one time, the radio will select channel from low
to high by itself. When it selects the channel, it will lock and play.
4. Channel selection by manual
When the radio’s signal weak, it adopts channel selection by
manual.Press5.<key or 6.>key to downwards or upwards channel
selection.Press5.<key or 6.>key long time, it can downwards or
upwards channel selection fast.
5. Memory channel by manual
When it selects the channel by automatic or by manual, press the
preset key of memory channel long time (more than 3 seconds).
6. Stereo/mono mix switcher
Press 4.MO/ST to switch the stereo mix and mono mix. When the
display ”STEREO” lights, it is the stereo mix mode. If the
display
”
∞ ” light, it means the stereo channel. If the signal of the
stereo mixes weak, please switch to the mono mix mode to
improve the effect.
7. Time/ frequency switcher
Press 3.CLK key to switch the time/frequency mode. When it is
the time mode, press other key (except PWR key), it will return
the frequency mode. It will return the time mode by automatic
after 5 seconds
8. Time adjusting