Yuchai YC25-8 User Manual Download Page 166

Page: 166 / 205

Hydraulic Digger

5-36

oil drain valve of the oil tank or the oil drain cock to vent the

surplusage

5) Take down the oil absorbent filter(see

③

)

6) Clean the inside of the oil tank

7) Clean the vent cock and the vent valve, install it again.

8) Clean the oil absorbent filer. Take out the oil absorbent filer

③

from the sprue (No let the dust drop into the inside of the oil

tank).Take-down the parts of the filter, clear the impurity of the

inside, and clean the parts with the diesel oil, then install it

again.

9) Install the oil absorbent filer into the flange(see

④

),then immit

the new oil which as the hydraulic oil choose request and the

Cleanness not exceed NAS6 grade, arrive the view area of the

oil leveler. Cover the cover assembly and screw sown the nut

last.

4. Vent the air which in the hydraulic system

Summary of Contents for YC25-8














































































































































































































Search results

Summary of Contents for YC25-8

Reviews:

Brands by name

Popular brands

Yuchai YC25-8, User Manual

Search results

Summary of Contents for YC25-8

Reviews:

Brands by name

Popular brands