manualshive.com logo in svg

Yuchai YC25-8, User Manual

Share
Download
Yuchai YC25-8 User Manual Download Page 190

Hydraulic Digger 

5-60 

Replace The Gear of The Bucket 

It replaces the gear of the bucket before the base of the gear fray. 

Warning: If the operation device because of the wrong 

operation and lead it moving, it very dangerous when replace the 

gear. Before replace the gear, it should make the operation 

device locked, then stop the engine and let all the joy stick 

locked. It need use the guard to avoid the axes out.

 

Replace the gear 

1) Make the base device of the bucket on the stow-wood for 

take-down the axes. Check whether the operation device stay 

the tranquilization state and the bucker place level. Then push 

up the safety lock of the left control box, then stop the engine. 

 

2)  Put the metal stick which the diameter smaller than the axes on 

the axe’s head, use the hammer knock the stick to knock out the 

axes, and take-down the gear. 

Summary of Contents for YC25-8














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands