manualshive.com logo in svg

Yuchai YC25-8, User Manual

Share
Download
Yuchai YC25-8 User Manual Download Page 154

Hydraulic Digger 

5-24 

 

 

 

 

 

 

2.  Check the rubber soft pipe and the clip 

Check it everyday or every 10 hours. 

It needs replace the soft pipe if it has the flaw or become hard 

because of the aging. 

Check whether the clip locked, if it becomes less crowded or 

destroy ,it need replace it in time. 

 

3.  Clean and Check the vane of the radiator 

Clean it every 500 hours. 

It need clean it in time. Because the dust of the radiator (water 

tank) will affect the effect of the cooling. 

Open the cover, and use the high-pressure water or the compress 

air to blow the dust or the leaves and so on. Meantime, it need 

clean the cleading which front of the cooler .If the machine has 

the air-condition, it need clean the condenser. 

Warning: The hot coolant will spurt when open 

the cover of the radiator. 

The way to open the cover: Open the cover little after the 

system cooled .Then wait it release the pressure. 

Summary of Contents for YC25-8














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands