Yuchai YC25-8 User Manual Download Page 63

Page: 63 / 205

Hydraulic Digger

3-7

Press the switch, the trumpet rings, when the machine will start or
act, to remind of safety who around the machines.

Instruction Sheet

meter of fuel

It indicates the fuel quantity of the fuel tank.
When the oil under 1/5,the sign sparks. When
the oil under 1/10,the sign sparks and the
buzzer rings

Working hour meter
It indicates the working time which accumulative
total.

Alarming indicate

Power supply
When the switch in the working location, it lights
means switch on.

Machine oil low-pressure alarming of engine
If the machine oil pressure of the engine under
0.1Mpa, the annunciator lights.

Water high-temperature alarming of engine
If the water temperature is higher than the
standard value, the annunciator light.

Charge indicator light

After the engine start, it lights. When the engine is
working, the light crushes out. If the engine has
already working but it light, means the dynamo

Summary of Contents for YC25-8














































































































































































































Search results

Summary of Contents for YC25-8

Reviews:

Brands by name

Popular brands

Yuchai YC25-8, User Manual

Search results

Summary of Contents for YC25-8

Reviews:

Brands by name

Popular brands