manualshive.com logo in svg

Yuchai YC25-8, User Manual

Share
Download
Yuchai YC25-8 User Manual Download Page 91

Hydraulic Digger 

4-13 

2)  Operate the left & right driving joy stick as follow: 

When the bulldozer in front, pushes the foreside of the joy stick 

forward slowly, and make the machine moves. 

 

When the bulldozer in back, pull the joy stick backward slowly, 

and make the machine moves. 

 

Caution: When it is the lower temperature, the driving speed 

of the machine doesn’t right, it need to warm-up. Otherwise, 

if the bottom of the machine has the soil, the driving speed 

doesn’t right, it need to clear the soil. 

4.  Moving the machine backward 

1) Adjust the safety lock handle and the control box to the free 

station, lift the operation device and off the ground 40cm to 

50cm 

2)  The operation is opposition forward 

5. Stop the machine 

Make the left & right joy stick to the middle, it stops the machine. 

 

Summary of Contents for YC25-8














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands