Yuchai YC25-8 User Manual Download

Page: 108 / 205

Hydraulic Digger

4-30

Place The Machine

Safe rule

1) Avoid to stopping the machine suddenly. When it places the

machine, it need have enough space.

2) Place the machine on the ground which hard and smooth.

No place it on the slope. If it must places the machine on the

slope, it need put the stow-wood under the pedrail ,make the

operation device inset the ground.

3) If it touches the joy stick of the operation device incautious,

the operation device or the machine moves, it will lead the

accident. So before leave the seat, it must to lock the joy

stick of the safety lock.

Place the machine

1) Make the left/right driving joy stick stay the middle. Stop the

machine.

Summary of Contents for YC25-8














































































































































































































Search results

Summary of Contents for YC25-8

Reviews:

Related manuals for YC25-8

Brands by name

Popular brands

Yuchai YC25-8, User Manual

Search results

Summary of Contents for YC25-8

Reviews:

Related manuals for YC25-8

Brands by name

Popular brands