York YSCD, Manual, Page: 61 / 108

61
JOHNSON CONTROLS
FORM 145.05-NOM2 (807)
Point ID Point Description
Variable
Type
Read ( R )
Write ( W )
Value
Range
(Analog
Only)
Unit
(Analog
Only)
Instance
Number
Comments
DmpSatMod
Bypass Damper Output Based
on Supply Air Temperature
BAV R 0 - 100 % 16122 Only with Flexsys
Duct Hi Static
Status of the Duct Static High
Limit Switch:
1 = Normal - Active
0 = Fault - Inactive
BBI R - - 12005
Duct Stat 1 Out Duct Static 1 Input BAI R 0 - 2 inc wc 16102
Only with VAV or
Flexsys
Duct Stat 2 Out Duct Static 2 Input BAI R 0 - 2 inc wc 16103
Only with VAV or
Flexsys
DuctHP
High Duct Pressure Alarm:
1 = Fault - Active
0 = No Fault - Inactive
BBV R - - 15101
DuctSP Derived Duct Static Input BAV R 0.0 – 5.0 in of wc 16120
Only with VAV or
Flexsys
DX Temp
Evaporator Coil Leaving
Temperature
BAI R 0 - 120 Deg F 13019 Only with Flexsys
DxPrs
Minimum Allowable Pressure
Drop Across the Evaporator
Coil
BAV R/W 0.2 - 1.0 in of wc 16005 Only with Flexsys
DxPrsMn
Minimum Pressure Drop
Across the Evaporator Coil to
Prove Air Flow
BAV R/W 0.06 - 1.0 in of wc 16023 Only with Flexsys
E/W Econ En BBV 15008 Not Applicable
E/W Min BAV 16017 Not Applicable
E/W Mod BAO 14004 Not Applicable
E/W Rat Mod BAV 16114 Not Applicable
E/W Sat Mod BAV 16113 Not Applicable
E/W Temp BAI 13004 Not Applicable
E/WSadMod
Economizer PID Output Based
on Dew Point Temp
BAV R 0 - 100 % 16124
Only with
Economizer,
FlexSys with Dew
Point Control
EcRat Enable
Economizer Return Air Temp
Control:
1 = Enabled
0 = Disabled
BBV R/W - - 15007
EcSad Enable
Economizer Dew Point Temp
Control:
1 = Enabled
0 = Disabled
BBV R/W - - 15009 Only with Flexsys
Continued on next page
TABLE 15 – BACnet MS/TP points (Cont.)
6