App-1
IM WT5000-02EN
Appendix 1 Messages and Corrective Actions
Messages
Messages may appear on the screen while you are using this instrument. This section describes the
error messages and how to respond to them. You can display the messages in the language that you
specify through the operations explained in section 16.4. If servicing is necessary to solve the problem
indicated by a message, contact your nearest YOKOGAWA dealer.
In addition to the following error messages, there are also communications error messages. These
messages are explained in the communication interface user's manual, IM WT5000-17EN.
Warning Messages (1 to 99)
Code
Message
Chapter or Section
3
Turned on pressing the ESC key.
The system has been initialized.
3.7
1
11
Cannot measure PLL frequency.
Check input level.
5.1
12
File access slow. Too many files in directory or medium read/write speed slow.
8.6
64
File access is aborted.
—
80
System Configuration was changed.
The system has been initialized.
—
81
Input element configuration was changed. The system has been initialized.
—
84
Key lock is enabled.
To release the lock, press the KEY LOCK key.
1.2
1
85
In remote control mode, all keys are locked except LOCAL (UTILITY) key.
Please hit LOCAL (UTILITY) key to exit the remote control mode.
Chapters 1 to 3
2
86
In Local Lockout mode, all keys are locked.
Please cancel the local lockout.
Chapters 1 to 3
2
87
Firmware was changed.
The system has been initialized.
—
88
Integration has started and
measurement ranges are switched to fixed ranges.
2.2, 2.3
89
Processing system settings change.
Please wait for a moment.
—
93
This model has neither motor evaluation function or auxiliary input.
Check the specifications to see whether or not the optional motor evaluation function and
the optional auxiliary input are provided.
16.9
95
Null setting is OFF. When using the current sensor, please enable the null settings.
11.1
1 Getting Started Guide, IM WT5000-03EN
2 Communication Interface User’s Manual, IM WT5000-17EN
Appendix
