manualshive.com logo in svg

YOKOGAWA WT5000, User Manual

Share
Download
YOKOGAWA WT5000 User Manual Download Page 55

2-12

IM WT5000-02EN

2.3  Configuring the Current Sensor

Procedure Using the Menu Icons

You can also use the menu icons shown on the right side of the screen to set the external current 
sensor range.

1.

  Tap the 

Range

 menu icon 

. A Range menu appears in the sub menu area on the right side 

of the screen.

By tapping the displayed items, you can specify the same settings as when using the keys explained 
earlier.

Note

For details on the Range menu, see page viii.

Procedure Using Keys

You can also use the front panel keys to set the external current sensor range.

 

Select the element to be configured (1 to 7).

Select the external current sensor range (fixed).

You can select from the valid measurement ranges 

selected in section 2.5.

Set the external current sensor range to auto.

Select options.

See “Procedure Using Keys” in section 9.1. 

(This is not used in this section.)

Note

To turn the external current sensor on and off or set the sensor conversion ratio and other details, use the 
Setup menu.

Summary of Contents for WT5000










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands