YOKOGAWA WT5000 User Manual Download Page 130

Page: 130 / 233

6-9

IM WT5000-02EN

Setting the Display Format (Form)

Set the division of the trend display screen and time scale (Time/div).

Tap

Form

. A Trend Form screen appears.

Closes the menu

Set the number of divisions of the waveform screen

(Single, Dual, Triad, Quad).

Set the time scale

(3s, 6s, 10s, 30s, 1min, 3min, 6min, 10min, 30min, 1hour, 3hour, 6hour,

12hour, 1day).

Configure the trend display's detailed settings.

Restarts the trend

Items that are marked with (*) are shared among all groups.

Like the graph display, pinch in or pinch out to switch the time scale

(see section 6.2).

Advanced Waveform Display (Advanced)

Tap

Advanced

. A Form screen appears.

Closes the menu

Set the scale value display (OFF, ON).

Set the display interpolation ( , ).

Set the grid ( , , ).

Set the waveform label display (OFF, ON).

Items that are marked with (*) are shared among all groups.

Displaying the Current Trend Values (Value)

Tap

Value

. The current value is displayed on the trend display.

Tapping Value again clears the Value display.

Value display

Trend screen

6.3 Trend Display

Summary of Contents for WT5000










































































































































































































































Search results

Summary of Contents for WT5000

Reviews:

Related manuals for WT5000

Brands by name

Popular brands

YOKOGAWA WT5000, User Manual

Search results

Summary of Contents for WT5000

Reviews:

Related manuals for WT5000

Brands by name

Popular brands