manualshive.com logo in svg

YOKOGAWA WT5000, User Manual

The YOKOGAWA WT5000, a cutting-edge measurement instrument, comes with a comprehensive User Manual. This manual provides detailed instructions and insights on the product's optimal usage. It can be easily downloaded for free from our website, enabling users to make the most of their WT5000 experience.

Share
Download
background image

2-21

IM WT5000-02EN

2.7  Setting the Line Filter and Frequency Filter

► “Line Filter (Line Filter)” in the features guide

► “Frequency Filter, Rectifier, Level (Freq Filter/Rectifier/Level)” in the features guide

This section explains operating procedures using the following setup methods.
•  Procedure Using the Setup Menu (see chapter 1)

•  Procedure Using the Menu Icons (see page iii)
Depending on the measurement mode or the method of computing measurement values (computing 
method), the settings may be different from the description in this section, the settings may be invalid, 
or the settings may not be configurable. For details, see the features guide.

Procedure Using the Setup Menu

1.

  Tap the 

Setup

 icon 

, or press 

MENU

 under SETUP.

Setting the Line Filter and Frequency Filter (Cutoff)

2.

  Tap the 

Input (Basic)

 tab. An input settings (basic measurement conditions) overview screen 

appears.

Pressing 

ESC

 closes the overview screen.

 

  

Input (Basic) tab

Set the line filter.

Set the frequency filter.

Note

You can also display the input settings (basic measurement conditions) overview screen by moving the 
cursor on the Input (Basic) tab using the arrow keys and then pressing SET.

Setting the Line Filter (Line Filter)

3.

 Tap 

Line Filter

. A line filter setup screen appears.

 

  

Line filter (example of element 1)

Turns the line filter on or off

Set the cutoff frequency of the line filter 

(0.1 kHz to 100.0 kHz (0.1 kHz steps), 1 MHz).

Summary of Contents for WT5000










































































































































































































































Reviews:

No comments

Related manuals for WT5000

jenway 570 Instruction Manual preview
570
Brand: jenway Pages: 20
Panasonic PV-V4524S Service Manual preview
PV-V4524S
Brand: Panasonic Pages: 72
Panasonic KW9M Eco-Power Meter Installation Instructions preview
KW9M Eco-Power Meter
Brand: Panasonic Pages: 2
Nagano Keiki GC31 Instruction Manual preview
GC31
Brand: Nagano Keiki Pages: 25
Danaher Veeder-Root 7990 Series Quick Start Manual preview
Veeder-Root 7990 Series
Brand: Danaher Pages: 8
Rabid Elephant NATURAL GATE User Manual preview
NATURAL GATE
Brand: Rabid Elephant Pages: 18
GARANT ST2 Instruction Handbook Manual preview
ST2
Brand: GARANT Pages: 368
National Instruments 435 Series Where To Start preview
435 Series
Brand: National Instruments Pages: 12
Aqua Lung PHODS Technical Manual preview
PHODS
Brand: Aqua Lung Pages: 24
MICRO-EPSILON ODC 2600-40 Operating Instructions Manual preview
ODC 2600-40
Brand: MICRO-EPSILON Pages: 82
Van Walt Aquaread Quick Start Manual preview
Aquaread
Brand: Van Walt Pages: 2
DIALAB DTN-410 K User Manual preview
DTN-410 K
Brand: DIALAB Pages: 20
PCE Instruments PCE-PHD 1 Manual preview
PCE-PHD 1
Brand: PCE Instruments Pages: 20
Roland HP102e Owner'S Manual preview
HP102e
Brand: Roland Pages: 224
GE SimpliNano Original Instructions Manual preview
SimpliNano
Brand: GE Pages: 16
TDE Instruments Digalox DPM72-MPPV Instruction Manual preview
Digalox DPM72-MPPV
Brand: TDE Instruments Pages: 8
jenway 3345 Operating Manual preview
3345
Brand: jenway Pages: 53
Hanna Instruments IC-HI98165 Instruction Manual preview
IC-HI98165
Brand: Hanna Instruments Pages: 52

Brands by name

Popular brands

Load more brands