manualshive.com logo in svg

YOKOGAWA WE430, User Manual, Page: 33 / 73

Share
Download
YOKOGAWA WE430 User Manual Download Page 33

 

 

<3. Analyzer Operation>

3-10

IM 12Y18A03-01EN

1st Edition : Oct. 04, 2019-00

Default

Operator Action

Scrolling Marquee

Main Display

Notes

TIME

TIME

(flashing)

SEL

SCrn

Press 

 to set the time

00:01

ENTER 24HR TIME 

HOUR/MINUTE

##:## (hour : minute) 

(first digit flashing)

Press 

 / 

 to set the first digit

Press 

 to move to the next digit

Press 

 / 

 to set the valuesof 

the remaining digits and press 

 

to move through the remaining digits

ENTER 24HR TIME 

HOUR/ MINUTE

##:## (hour : minute) 

(change flashing digit)

Set in 24hour time 

format

Press 

 to accept the time setting 

and return to the main setup mode

TIME

(flashing)

SEL

SCrn

Press 

 to scroll to the next menu

Default

Operator Action

Scrolling Marquee

Main Display

Notes

LOG

LOG

(flashing)

SEL

SCrn

Press 

 to set the log interval

00:00

SET LOG TIME IN 

HOUR/ MINUTE

##:## (hour : minute)

LOg

(first digit flashing)

Press 

 / 

 to set the first digit

Press 

 to move to the next digit

Press 

 / 

 to set the values of 

the remaining digits and press 

 

to move through the remaining digits

SET LOG TIME IN 

HOUR/ MINUTE

##:## (hour : minute)

LOg

(change flashing 

digit)

To disable the log 

enter 0000 for the log 

interval

The minimum log 

interval is 1 minute 

and the maximum log 

interval is 99 hours 

and 59 minutes

Press 

 to accept the log setting 

and return to the main setup mode

LOG

(flashing)

SEL

SCrn

Press 

 to scroll to the next menu

 WARNING

The reset command will erase all operator settings, logs and calibration data. The analyzer will 

need to be set up and calibrated again before it can resume operation.

Summary of Contents for WE430










































































Reviews:

No comments