<3. Analyzer Operation>
3-2
IM 12Y18A03-01EN
1st Edition : Oct. 04, 2019-00
n
Description of Keypad Icons
Figure 3.2 Keypad Icons
Key
Parameter/Mode
Action
Operational Selections
Enters calibration mode
Calibration mode with operator
prompts
Depends on type of board installed
Scrolls up digit numbers
Scrolls up through a list of
options in setup and cal
modes
Use to edit numeric values
Use to select available options
0 through 9 selectable by digit,
first digit sometimes selectable 0
through 19
Enters setup mode
System setup mode at the last
parameter used by the operator
PASS, DATE, TIME, LOG,RSET,
DISP, CH1, CH2, MDL, MEAS,
HOLD, TCMP, TADJ, ALRM, mA1,
mA2, mADJ, TEST, CAL, PH,
COND, DYN
Moves to the nextdigit
Use to edit values
When moved to final digit, the
system will wrap around to first digit
Enters test mode
Use to advance through sequence
of displays DIAGNOSTICS will
appear in top right of screen
Scroll down digit numbers
Scroll down through a list
of options in setup and cal
modes
Use to edit numeric values
Use to select available options
0 through 9 selectable by digit,
first digit sometimes selectable 0
through 19
Enters log view mode
Use to view data in calibration,
measure and status logs
+/- function
Enters negative/positive sign when
editing numbers
Enter function
Use to accept value orselection
displayed on screen and store value
or selection in memory
Enter function
(in test mode only)
Use in test mode to
displayadditional information for
selected menus
Exit to measure function
Use to exit setup or cal modes and
enter the measure mode
Analyzer automatically enters
measure mode when first turned on
and after calibration
Last screen function
Use in setup and test modes to
return to the previous screen or
menu
Decimal point function
Use to set the decimal point position
in certain menus with numbers that
require a decimal point