YOKOGAWA UPM100 User Manual Download Page 9

Page: 9 / 104

1-1

IM 77C01H01-10EN

Setup

1 Setup

This chapter describes the setup procedure required to use the communication functions

and the communication specifications of the UPM100 universal power monitor.

Hereafter, the UPM100 universal power monitor is simply referred to as the UPM100.

1.1 Setup Procedure

Set up the communication functions on the UPM100 as follows:

Set up the communication function parameters of the UPM100.

For the UPM100 with display function, set up the communication conditions using the

front panel keys.

For the UPM100 without display function, set up the communication conditions using

the front DIP switches. (See the user's manual of Model UPM100 Power Monitor

<Initial Setup Operations>.)

Connect a higher-level device and a UPM100.

(See the user's manual of Model UPM100 Power Monitor <Installation>.)

Create communication programs for the higher-level device to perform communication.

(See "4. PC Link Commnication" or "5. MODBUS Communication" for the communication

protocol. See "6. Functions and Usage of D Registers", "7. Functions and Usage of I

Relays" and "8. UPM01 Communication" for the data storing.)

010101E.EPS

To avoid an electric shock, be sure to turn off the power supply source to the

equipment involved before you start wiring.

Note

• In the case of PLC (MELSEC:Mitsubishi Electric Corporation’s sequencer), “B” is for (-), and “A”

is for (+).

• Do not share the grounding wire with another instrument. Doing so may result in a failure of the

instrument. Use crimp terminals at cable ends.

Note Create communication programs referring to the documentation of each higher-level device.

Higher-level devices : PCs, PLCs (sequencers), touch panels, and others.

Chapter 1 Setup

Summary of Contents for UPM100









































































































Search results

Summary of Contents for UPM100

Reviews:

Related manuals for UPM100

Brands by name

Popular brands

YOKOGAWA UPM100, User Manual

Search results

Summary of Contents for UPM100

Reviews:

Related manuals for UPM100

Brands by name

Popular brands