YOKOGAWA UPM100, User Manual

Page: 79 / 104

6-5
IM 77C01H01-10EN
Functions and Usage of D Registers
6
6.4 D Register Map
D-Reg
No.
Ref No. H No.
Register
Symbol
Register Name Effective Range
Initial
Value
Back-
up
R/W
D0043 40043 002A VT L VT ratio (float, lower 2 bytes)
1 to 6000 1 ○
* R/W
D0044 40044 002B VT H VT ratio (float, upper 2 bytes) * R/W
D0045 40045 002C CT L CT ratio (float, lower 2 bytes)
0.05 to 32000 1.00 ○
* R/W
D0046 40046 002D CT H CT ratio (float, upper 2 bytes) * R/W
D0047 40047 002E LOWCUT L Integral low-cut power (float, lower 2 bytes)
0.05 to 20.00 [%] 0.05 ○
* R/W
D0048 40048 002F LOWCUT H Integral low-cut power (float, upper 2 bytes) * R/W
D0049 40049 0030 PULSE1 Pulse unit-1 of electric energy (uint16)
1 to 50,000 [x10Wh/pls]
(Note 1)
100 ○ * R/W
D0050 40050 0031 – Do not use. – – – –
D0051 40051 0032 – Do not use. – – – –
D0052 40052 0033
PULSE1
WIDTH
ON pulse width-1 of electric energy (uint8)
1 to 127 [x10ms]
(Note 1)
5 ○ * R/W
D0053 40053 0034
INTEG START
STOP
Start/stop of integration 0: Start, 1: Stop 0 ○ * R/W
D0054 40054 0035 – Do not use. – – – –
D0055 40055 0036 – Do not use. – – – –
D0056 40056 0037 – Do not use. – – – –
D0057 40057 0038 kWh SET L Active energy - setpoint (uint32, lower 2 bytes) 0 to 99,999,999 [kWh]
0 to 99,999,999 [Wh]
(Note 2)
0 X
W
D0058 40058 0039 kWh SET H Active energy - setpoint (uint32, upper 2 bytes) W
D0059 40059 003A RMT RST Remote reset
If other than 1: Invalid
If 1: UPM100 is hard-reset
0 X W
D0060 40060 003B kWh RST Active energy reset
If other than 1: Invalid
If 1: Active energy
(D0001, D0002) is reset
0 X W
D0061 40061 003C MAX RST Maximum/minimum values reset
If other than 1: Invalid
If 1: Maximum/minimum
values (D0023 to D0040)
are reset
0 X W
D0062 40062 003D Wh START Start of optional integration
If other than 1: Invalid
If 1: Optional integration
(D0003 to D0006) starts
0 X W
D0063 40063 003E Wh STOP Stop of optional integration
If other than 1: Invalid
If 1: Optional integration
(D0003, D0004) stops
0 X W
D0064 40064 003F RWh Regenerative energy reset
If other than 1: Invalid
If 1: Regenerative energy
(D0067, D0068) is reset
0 – W
D0065 40065 0040 – Do not use. – – – –
D0066 40066 0041 – Do not use. – – – –
D0067 40067 0042 RKWH L Regenerative energy (uint32, lower 2 bytes)
0 to 99,999,999 [kWh]
0 to 99,999,999 [Wh]
(Note 2)
0 ○ R
D0068 40068 0043 RKWH H Regenerative energy (uint32, upper 2 bytes) 0 ○ R
D0069 40069 0044 RWH SET L Regenerative energy - setpoint (uint32, lower 2 bytes) 0 – W
D0070 40070 0045 RWH SET H Regenerative energy - setpoint (uint32, upper 2 bytes) 0 – W
D0071 40071 0046 RWH STS Regenerative energy writing status
If other than 1: Invalid
If 1: The values of D0069
and D0070 are written as
the integrated value
0 – W
D0072 40072 0047 SET STS Setup change status
If other than 1: Invalid
If 1: Initialization is
performed to validate setup
changes (D0043 to D0049,
D0052, D0085, D0087, and
D0088 are validated)
0 X W
D0073 40073 0048 kWh STS Active energy writing status
If other than 1: Invalid
If 1: The values of D0057
and D0058 are written as
the integrated value
0 X W
Note 1: The UPM100-xx2xx and UPM100-xx3xx allow this register to be read and written.
Note 2: For the UPM100-xxxx0 to -xxxx3, the unit is [kWh].
For the UPM100-xxxx4 to -xxxx7, the unit is [Wh].