YOKOGAWA UPM100 User Manual Download Page 57

Page: 57 / 104

4-23

IM 77C01H01-10EN

PC Link Communication

4.3 Communication with Higher-level Devices

4.3.2

Communication with Touch Panel

Communication with a touch panel is achieved using the PC link communication protocol.

Set the communication conditions of the UPM100 identical to those of the touch panel.

040304E.EPS

Touch panel

Maximum overall cable length of 1200 m for a maximum of 31 slave stations

Figure 4-4 Communication with Touch Panel

For more information, refer to the user’s manual of the touch panel to be connected.

Model

Description

Digital’s Pro-face

GP-570

(*1)

GP-2300

Note 1: For Digital’s graphic panels, contact Digital Corp. directly.

Note 2: The system data area should be assigned to D0101 to D0150 of user area.

*1: Display devices differ depending on the model.

Summary of Contents for UPM100









































































































Search results

Summary of Contents for UPM100

Reviews:

Related manuals for UPM100

Brands by name

Popular brands

YOKOGAWA UPM100, User Manual

Search results

Summary of Contents for UPM100

Reviews:

Related manuals for UPM100

Brands by name

Popular brands