YOKOGAWA UPM100 User Manual Download Page 5

Page: 5 / 104

iii

IM 77C01H01-10EN

Notices

Regarding This User’s Manual

1. This manual should be passed on to the end user. Keep the manual in a safe place.

2. Read this manual carefully to gain a thorough understanding of how to operate this

product before you start using it.

3. This manual is intended to describe the functions of this product. Yokogawa Electric

Corporation (hereinafter simply referred to as Yokogawa) does not guarantee that these

functions are suited to the particular purpose of the user.

4. Under absolutely no circumstance may the contents of this manual, in part or in whole,

be transcribed or copied without permission.

5. The contents of this manual are subject to change without prior notice.

6. Every effort has been made to ensure accuracy in the preparation of this manual.

Should any errors or omissions come to your attention however, please contact your

nearest Yokogawa representative or our sales office.

Regarding Protection, Safety, and Prohibition Against Unauthorized Modification

1. In order to protect the product and the system controlled by it against damage and

ensure its safe use, be certain to strictly adhere to all of the instructions and precautions

relating to safety contained in this document. Yokogawa does not guarantee safety if

products are not handled according to these instructions.

2. The following safety symbols are used on the product and/or in this manual.

Symbols Used on the Product and in This Manual

Markings

This symbol on the product indicates that the operator must refer

to an explanation in the user’s manual in order to avoid the risk

of injury or death of personnel or damage to the instrument. The

manual describes how the operator should exercise special care

to avoid electric shock or other dangers that may result in injury or

loss of life.

Protective

Grounding

Terminal

This symbol indicates that the terminal must be connected to

ground prior to operating the equipment.

Summary of Contents for UPM100









































































































Search results

Summary of Contents for UPM100

Reviews:

Related manuals for UPM100

Brands by name

Popular brands

YOKOGAWA UPM100, User Manual

Search results

Summary of Contents for UPM100

Reviews:

Related manuals for UPM100

Brands by name

Popular brands