YOKOGAWA TA120E, User Manual

Page: 96 / 165

8-25
IM 704420-01E
Communication Function
8
: I N P u t : P L L [ : M O D E ] : I N P u t : P L L [ : M O D E ] : I N P u t : P L L [ : M O D E ] : I N P u t : P L L [ : M O D E ] : I N P u t : P L L [ : M O D E ]
Function Sets the PLL or queries the current setting.
Syntax :INPut:PLL[:MODE] {Boolean}
:INPut:PLL[:MODE]?
Example :INPUT:PLL:MODE ON
:INPUT:PLL:MODE?
→
:INPUT:PLL:MODE 1
Description You can set or query the PLL only when the
measurement function is set to “ DTOC .”
: I N P u t : P L L : S T A T u s ? : I N P u t : P L L : S T A T u s ? : I N P u t : P L L : S T A T u s ? : I N P u t : P L L : S T A T u s ? : I N P u t : P L L : S T A T u s ?
Function Queries the lock condition (when the clock
signal could be regenerated from the data
signal) of the PLL.
Syntax :INPut:PLL:STATus?
Example :INPUT:PLL:STATUS?
→
:INPUT:PLL:
STATUS LOCK
Description You can query the PLL only when the
measurement function is set to “ DTOC ” and the
PLL is “ ON .”
• When not locked: UNLOCK is returned.
• When locked: LOCK is returned.
8.7.7 MEASure Group
The commands in this group deal with measurement conditions.
:MEASure : FUNCtion <Space> DTOC
D3T
?
SPEed <Space> <NRf>
?
?
;
: M E A S u r e ? : M E A S u r e ? : M E A S u r e ? : M E A S u r e ? : M E A S u r e ?
Function Queries all settings related to the measurement.
Syntax :MEASure?
Example :MEASURE?
→
:MEASURE:FUNCTION DTOC
: M E A S u r e : F U N C t i o n : M E A S u r e : F U N C t i o n
: M E A S u r e : F U N C t i o n : M E A S u r e : F U N C t i o n
: M E A S u r e : F U N C t i o n
Function Sets the measurement function or queries the
current setting.
Syntax :MEASure:FUNCtion {DTOC|D3T}
:MEASure:FUNCTION?
Example :MEASURE:FUNCTION DTOC
:MEASURE:FUNCTION?
→
:MEASURE:FUNCTION DTOC
: M E A S u r e : S P E e d : M E A S u r e : S P E e d : M E A S u r e : S P E e d : M E A S u r e : S P E e d : M E A S u r e : S P E e d
Function Sets the
×
N speed or queries the current
setting.
Syntax :MEASure:SPEed <NRf>
:MEASure:SPEed?
<NRf>=1.0 to 10.0
Example :MEASURE:SPEED 1.0
:MEASURE:SPEED?
→
:MEASURE:SPEED 1.0E+00
Description This command can be used only when the
measurement function is set to “ D3T .”
8.7 Commands