YOKOGAWA TA120E, User Manual

Page: 93 / 165

8-22
IM 704420-01E
: D C O u t : J U D G e : R E S u l t ? : D C O u t : J U D G e : R E S u l t ? : D C O u t : J U D G e : R E S u l t ? : D C O u t : J U D G e : R E S u l t ? : D C O u t : J U D G e : R E S u l t ?
Function Queries the determination result.
Syntax :DCOut:JUDGe:RESult?
Example :DCOUT:JUDGE:RESULT?
→
GO
Description This command can be used only when the DC
output mode is set to “ JUDGe .”
• If the result is GO, “ GO ” is returned.
• If the result is NOGO, “ NOGO ” is returned.
• If the result is NOJUDGE, “ NOJUD ” is returned.
• If the PLL is turned ON, determination cannot
be performed until the clock signal is
regenerated from the data signal. If the clock
signal cannot be regenerated, “ NOJUD ” is
returned.
: D C O u t : M O D E : D C O u t : M O D E : D C O u t : M O D E : D C O u t : M O D E : D C O u t : M O D E
Function Sets the DC output mode or queries the current
setting.
Syntax :DCOut:MODE {JITTer|JUDGe}
:DCOut:MODE?
Example :DCOUT:MODE JITTER
:DCOUT:MODE?
→
:DCOUT:MODE JITTER
: D I S P l a y ? : D I S P l a y ? : D I S P l a y ? : D I S P l a y ? : D I S P l a y ?
Function Queries all settings related to the display.
Syntax :DISPlay?
Example :DISPLAY?
→
:DISPLAY:SCALE R10;
STATISTIC 1;UNIT NS
: D I S P l a y : M E A S u r e : D I S P l a y : M E A S u r e : D I S P l a y : M E A S u r e : D I S P l a y : M E A S u r e : D I S P l a y : M E A S u r e
Function Sets the measured value to displayed or queries
the current setting.
Syntax :DISPlay:MEASure {JITTer|SDEViation|
AVERage}
:DISPlay:MEASure?
Example :DISPLAY:MEASURE JITTER
:DISPLAY:MEASURE
→
:DISPLAY MEASURE JITTER
: D I S P l a y : S C A L e : D I S P l a y : S C A L e
: D I S P l a y : S C A L e : D I S P l a y : S C A L e
: D I S P l a y : S C A L e
Function Sets the scale of the analog meter or queries
the current setting.
Syntax :DISPlay:SCALe {R10|R20}
:DISPlay:SCALE?
Example :DISPLAY:SCALE R10
:DISPLAY:SCALE?
→
:DISPLAY:SCALE R10
8.7.5 DISPlay Group
The commands in this group deal with the display.
:DISPlay : SCALe <Space> R10
R20
?
STATistic <Space> OFF
ON
<NRf>
?
MEASure <Space>
JITTer
SDEViation
AVERage
?
?
;
8.7 Commands
: D I S P l a y : S T A T i s t i c : D I S P l a y : S T A T i s t i c : D I S P l a y : S T A T i s t i c : D I S P l a y : S T A T i s t i c : D I S P l a y : S T A T i s t i c
Function Turns ON/OFF the numeric display or queries
the current setting.
Syntax :DISPlay:STATistic {Boolean}
:DISPlay:STATistic?
Example :DISPLAY:STATISTIC ON
:DISPLAY:STATISTIC?
→
:DISPLAY:STATISTIC 1