YOKOGAWA IR400 series, User Manual

Page: 68 / 121

<6. SETTING AND CALIBRATION>
6-27
IM 11G02N01-01E
Description of setting items
6.7 Parameter setting
It allows you to carry out the parameter setting such as time, key lock, etc., as required. Items to be set
are as follows:
• Current Time : Current year, month, date, day of the week, hour, and minute setting
(The display appears in this order.)
Note: The clock backup time is 2 days. If power is turned on after it is kept off for 2 days or longer,
make the time setting again.
• Key Lock : Sets with ON/OFF so that any key operation except the key lock OFF
cannot be performed.
• Output Hold : Sets whether Calibration Output is held or not, and the holding value setting.
• Reset Av. Output : Resets the average value.
• Response time : Sets the response time of electrical system.
• Average Period : Sets the moving average time.
• Backlight Timer : Sets automatic OFF of the backlight of display unit and the time until
backlight out.
• Maintenance mode : Enters passwords to switch to the Maintenance mode.
* For the maintenance mode, see Item 6.8.
MODE
ENT
( )
ENT
( )
F6_7.ai
(1) To display the User mode, press the
MODE
key in the measurement mode.
(2) Point the cursor to “Parameter Setting”
by pressing the or key. Press the
ENT
key.
(3) In the “Parameter Setting” screen that
appears, point the cursor to any item you
want to set by pressing the or
key. Press the
ENT
key.