YOKOGAWA F3LP32-0N, User Manual

Page: 41 / 104

3-5
IM 34M06H43-02E 2nd Edition : Sep.30, 2019-00
3.4 Setting Parameters
Remove the module right side cover to gain access to a 4-pole slide switch.
Turn this switch on or off to set the parameters.
Turn off the power supply before performing this operation. If the switch is set
with the power turned on, the setting will be invalid.
Leave unused switches “Always Off”.
■
Setting Parameters
1
2
3
4
O
F
F
Number Setting Item
OFF
ON Factory Setting
OFF ON
Switch
Number 1
1
2
3
4 Not used
Normal High-speed
OFF
OFF
OFF
~
OFF
Number 2
OFF
ON
1.25Mbps 250kbps
125kbps 625kbps
Transmission
speed
Refer to the table below.
Operation mode
~
Figure 3.4.1 Setting Parameters
■
Setting Operation Mode
The FA Link H2 module supports two operation modes: normal mode and high-
speed mode.
In high-speed operation mode, the system can use up to 1024 link devices; internal
processing is faster and the response time is shorter, when compared to normal
mode.
In normal operation mode, the system supports up to 2048 link devices.
Select the appropriate operation mode to suit your system specifications.